Bulk Container

Specifications of 20 Feet Bulk Container:
1. Min. Order: 1 Unit
2.Cubic Capacity: 32.5m³
3. Stacking:192 ton
4.Length:External:6,058 mm
                Internal:5,844 mm
5. Width:External:2,438 mm
               Internal:2,352 mm
6.Height:External:2,591 mm
                Internal:2,366 mm

Dimension of 20 Feet Bulk Container:
Dimension
External
Internal
Length
6,058 mm
5,844 mm
20'
19'-2  5/64"
Width
2,438 mm
2,352 mm
8'
7'-8  17/32"
Height
2,591 mm
2,366 mm
8'-6"
7'-9  15/64"

Weight
Tare weight
Payload
Gross weight
2,600 kg
27,880 kg
30,480 kg
5,730 lbs
61,470 lbs
67,200 lbs
Stacking
192,000 kg
Cubic Capacity
32.5 cu.m

Width
Height
Door Opening
2,340 mm
2,280 mm
7'-8  1/4"
7'-5  11/16"
Discharge Hatch
1,914 mm
556 mm
6'-3  23/64"
1'-9  57/64"
Roof Hatch
3 x Φ614 mm

Features of 20 Feet Bulk container:
1) They are generally cubic in form and therefore can transport more material in the same area than cylindrically shaped containers and far more than might be shipped in the same space if packaged in consumer quantities.
2) Composite IBCs rely on plastic liners that can be filled and discharged with a variety of systems.
3) The manufacturer/processor of a product can bulk package a product in one country and ship to many other countries at a reasonably low cost where it is subsequently packaged in final consumer form in accordance with the regulations of that country and in a form and language suitable for that country.

Applications of 20 Feet Bulk container:
Bulk containers are used in particular for transporting bulk cargo, such as grain, feedstuffs, and spices.
However, bulk container may also be used for transporting general cargo.

Bulk (or bulk cargo) containers have three loading hatches in the roof, each of a diameter of approx. 455 mm (1 3/4').
The distance between the hatches (center to center) is 1.83 m (6').
On the door side, there are two discharge hatches, which are sometimes equipped with short discharge tubes for guiding the bulk cargo. Alternatively, two unloading hatches may be mounted in the doorways, for emptying the containers.
Such containers may also be used for general cargo.
Lashing rings are mounted in the top side rails for securing the cargo.
Some bulk containers are equipped with forklift pockets, which allow handling by forklift trucks.

Testing & Inspection
1 Materials and Parts Inspection
All materials and parts are inspected by the manufacturer's Quality Control department to ensure they are up to the specification called fr in the design.

2 Production Line Quality Control
All containers are manufactured under effective quality control procedures to meet the specified standards. All dimensions are checked and smoothe operation of the doors are ensured after each container's completion. A light and watertight test is conducted on all containers.
Quality control personnel independent of the production dept. will be inspecting on all phaes of the production as well as ad hoc inspections by the calssificatin soceity's surveyor and buyer's representatives to assure the quality of the container.

Warranty
1 Guarantee
The guarantee period will commence the day after the certification is issued by the calssifcation society.

2 Paint Guarantee
The application of paint will be guaranteed against corrosion and paint failure for a period of three years. The guarantee is for all faults affecting more than 10% of the painted surfaces and will assure partial or total re-painting of the contianers. Normal wear/tear, or corrosion caued by acid, alkali or results of damages by abrasion, impact or accident are excluede.
Note: Corrosion is defined as rusting which exceed RE3 (European scale of degree of rusting) on at least ten percent of the total container surface coated with the concerned coating system.

3 Other Guarantee
This container will be guaranteed againt any defect or omissions in construction, workmanship and materials for a period of 24 months. In the event of defects, FACTORY will replace. correct or install to make the container satisfactory to this specification and its intended service at FACTORY's expense. Any damages caused by mis-handling, mis-securing, mis-loading, impact and any natures of accidents are excluded.